Banner

P Series DIO Boards

  • Buffered for machine control/robotic applications
  • Bi-Directional inputs can sense a variety of input voltages fron 3 to 50 Vdc/Vac
  • Each output Port is separate - A variety of devices can be controlled
  • Control 5-48VDC devices up to 2 Amps
  • LED Indicator for each Input and Output
  • OEM Package
  • Bus powered - No external power supply
  • Easy to use DLL interface
DIO3232P

Pictured : DIO3232P

Clearance/Overstock

Model Number

Version

Input Ports

Output Ports

Length

Width

Price

Qty

Stock

 

RP00001616P_1

2.01

2 x 8 bit

2 x 8 bit

3.1"

3.5"

60.00

In Stock

Input/Output

Model Number

Version

Input Ports

Output Ports

Length

Width

Price

Qty

Stock

 

DIO3232P

1.00

4 x 8 bit

4 x 8 bit

6.9"

3.5"

145.00

In Stock

DIO3232P_1

1.00

4 x 8 bit

4 x 8 bit

6.9"

3.5"

145.00

In Stock

These USB to DIO circuit boards are ideal for PC based control and automation of equipment including sensors, switches, relays, robotics, and industrial automation systems. They come in an OEM packag and are controlled with an easy to use DLL interface.

Bi-directional Inputs - Each 4 bit nibble has a common. Placing 3 - 50Vdc on the common sets up those 4 inputs to sense 0Vdc. Placing 0Vdc on the common sets up those 4 inputs to sense 3 - 50Vdc. The inputs will also work with low voltage AC signals. All input ports are optically isolated. Each input has a 3.9K 1 Watt current limiting resistor in series with the optoisolator. The inputs can sense voltages from 3 to 50 VAC/VDC. Higher voltages can be sensed by adding another resistor in series with the input. Each input has a clearly marked LED located on the board to indicate when a voltage is sensed.

Outputs - The output ports are P channel MOSFETs capable of switching voltages between 5 and 48 VDC. Each output is configured as a current source. The outputs are able to switch up to 2 Amps at 48 VDC. Each output has a clearly marked LED located on the board to indicate when that output is sinking current.

Each board is bus powered and will draw a maximum of 125 ma from the USB bus. While not required, it is recommended that the DIO board be connected directly to a computer 's USB port or to a powered USB hub.

RP0000xxxxP Termination - Screw clamp terminal blocks.
Terminal Block

RP0000xxxxP_1 Termination - 0.100" Pin Strip Headers.
Terminal Block
NOTE : The current rating for each output is derated to 1.25 Amps with the pin strip header.

Each board comes with a 6 foot USB2.0 cable. Software examples and the manual can be found on the support page .

Company Products Support BCS Ideas Corporation

About Us YourBell YourBell P.O. Box 213
Contact DAQ/DIO DAQ/DIO Kokomo, IN
Testimonials

46903 - 0213
Projects

Phone : 800.647.5470

FAX : 765.252.4161

This document maintained by BCS Ideas .
Material Copyright © 2006- BCS Ideas