Banner

S Series DIO Boards

  • Buffered for machine control/robotic applications
  • Bi-Directional inputs can sense a variety of input voltages fron 3 to 50 Vdc/Vac
  • Each output Port is separate - A variety of devices can be controlled
  • Control 5-50 Vac/Vdc devices up to 500 mA
  • LED Indicator for each Input and Output
  • OEM Package
  • Bus powered - No external power supply
  • Easy to use DLL interface
RP00003232S

Pictured : RP00003232S

Clearance/Overstock

Model Number

Version

Input Ports

Output Ports

Length

Width

Price

Qty

Stock

 

No Boards

 

 

 

 

 

 

 

 

 

Input/Output

Model Number

Version

Input Ports

Output Ports

Length

Width

Price

Qty

Stock

 

RP00000808S

3.00

1 x 8 bit

1 x 8 bit

2.7"

3.5"

90.00

2 Weeks

RP00001616S

3.00

2 x 8 bit

2 x 8 bit

4.1"

3.5"

140.00

In Stock

RP00002424S

3.00

3 x 8 bit

3 x 8 bit

5.5"

3.5"

190.00

In Stock

RP00003232S

3.00

4 x 8 bit

4 x 8 bit

6.9"

3.5"

240.00

In Stock

These units are ideal for PC based control and automation of equipment including sensors, switches, relays, robotics, and industrial automation systems.

Bi-directional Inputs - Each 4 bit nibble has a common. Placing 3 - 50Vdc on the common sets up those 4 inputs to sense 0Vdc. Placing 0Vdc on the common sets up those 4 inputs to sense 3 - 50Vdc. The inputs will also work with low voltage AC signals. All input ports are optically isolated. Each input has a 3.9K 1 Watt current limiting resistor in series with the optoisolator. The inputs can sense voltages from 3 to 50 VAC/VDC. Higher voltages can be sensed by adding another resistor in series with the input. Each input has a clearly marked LED located on the board to indicate when a voltage is sensed.

Outputs - The output ports are solid state relays. The outputs are able to switch up to 500 milliamps at 50 VAC/VDC. The on resistance is 0.8 Ohm max.. Each output has a clearly marked LED located on the board to indicate when that output is On.

Each board is bus powered and will draw a maximum of 125 ma from the USB bus. While not required, it is recommended that the RP0000xxxxS be connected directly to a computer 's USB port or to a powered USB hub.

Inputs Termination - Screw clamp terminal blocks.
Terminal Block

Outputs Termination - 45 Degree screw clamp terminal blocks.
Terminal Block

The RP0000xxxxS comes with an installation CDROM, manual and a 6 foot USB2.0 cable. Included on the CDROM are software examples to assist in getting the RP0000xxxxS up and running.

Company Products Support BCS Ideas Corporation

About Us YourBell YourBell P.O. Box 213
Contact DAQ/DIO DAQ/DIO Kokomo, IN
Testimonials

46903 - 0213
Projects

Phone : 800.647.5470

FAX : 765.252.4161

This document maintained by BCS Ideas .
Material Copyright © 2006- BCS Ideas