USB to Buffered Digital I/O, DIO (Digital Inputs, Outputs)

RP0000xxxxTBCLDC

USB To Buffered Digital I/O

Buffered for machine control/robotic applications
Each input is separate - A variety of input voltages can be used
Each output Port is separate - A variety of devices can be controlled
6-48VDC Inputs with current limit
Control 6-48VDC devices up to 2 Amps
LED Indicator for each Input and Output
OEM Package
Bus powered - No external power supply
Easy to use DLL interface

Pictured : RP00001616TBCLDC

Model Number	Input Ports	Output Ports	Length	Width	Price	Shipping	Qty
RP00000808TBCLDC	1- 8 bit	1- 8 bit	3.25"	3.5"	$80.00
RP00000016TBDC	0	2- 8 bit	3.3"	3.5"	$85.00
RP00001616TBCLDC	2- 8 bit	2- 8 bit	4.75"	3.5"	$105.00
RP00000032TBDC	0	4- 8 bit	4.875"	3.5"	$115.00
RP00002424TBCLDC	3- 8 bit	3- 8 bit	6.25"	3.5"	$135.00
RP00000048TBDC	0	6- 8 bit	6.45"	3.5"	$150.00
RP00003232TBCLDC	4- 8 bit	4- 8 bit	7.875"	3.5"	$170.00
RP00000064TBDC	0	8- 8 bit	8.025"	3.5"	$190.00

These units are ideal for PC based control and automation of equipment including sensors, switches, relays, robotics, and industrial automation systems.

The input ports are optically isolated. Each input has a 10K 1/2 Watt current limiting resistor in series with the optoisolator. The inputs can sense voltages from 6 to 48 VDC. Higher voltages can be sensed by adding another resistor in series with the input. Each input has a clearly marked LED located on the board to indicate when a voltage is sensed.

The output ports are mosfets capable of switching voltages between 6 and 48 VDC. Each output is configured as a current sink to ground. The outputs are able to switch up to 2 Amps at 48 VDC. Each output has a clearly marked LED located on the board to indicate when that output is sinking current.

The RP0000xxxxTBCLDC uses screw clamp terminal blocks. Each board is bus powered and will draw a maximum of 125 ma from the USB bus. While not required, it is recommended that the RP0000xxxxTBCLDC be connected directly to a computer 's USB port or to a powered USB hub.

The RP0000xxxxTBCLDC comes with an installation CDROM, manual and a 10 foot USB2.0 cable. Included on the CDROM are software examples to assist in getting the RP0000xxxxTBCLDC up and running.