YourBell Banner

Large Home Annunciator

The DYB2200 was designed for larger homes and homes with whole home audio. It has eight inputs to cover a variety of areas of the home. In example it can cover the front door, side door, pool gate and the driveway. For a small business it could cover several doors or shipping bays. Each input can play its own set of distinctive sounds. The line level out is typically routed to a paging type input of the master amplifier. This type of input overrides all the other inputs when a signal is sensed or a trigger input goes high. We have supplied a 12 Vdc trigger output for those amplifiers that require it. The optional internal amplifier plug in board can drive four 8 ohm speakers.

  • 100% customizable door chime that plays MP3 files
  • Eight optically isolated inputs
  • Line level output suitable for whole home audio system
  • Trigger output for whole home amplifiers that require it
  • Optional 10 Watt amplifier capable of driving 4 satellite speakers
  • Hardware volume control
  • All data stored on a SD flash data card.
  • Program up to 26 seasons or occasions.
  • Select a season or occasion using the push button.
  • Each season or occasion can have multiple sound files for each input.
  • Each input can have up to 255 sound files.
  • Drag & Drop your sound files to the SD memory card.

Manual

Price : $ 140.00
Lead Time : In Stock
Quantity :

No Programming Software Necessary


Sound

The DYB2200 comes equipped with a line level output for playback through an amplifier. The line level out is typically routed to a paging type input of the master amplifier. This type of input overrides all the other inputs when a signal is sensed or a trigger input goes high. We have supplied a 12 Vdc trigger output for those amplifiers that require it. The trigger is activated after a button is pressed but before the sound file starts playing. The time between trigger and the playing of the sound file is in milliseconds. If there is a substantial lag in time from when the amplifier receives the trigger and when sound is produced a short period of silence may need to be added to the beginning of each sound file.

The DYB2202 is a plug in 10 Watt amplifier module that produces excellent sound quality. There is a standard volume control for the amplified output. It has no affect on the line level out. The amplified output is capable of driving four 8 ohm speakers. This will work well in multi level homes, adding a speaker in the basement, placing a speaker outdoors for your company to enjoy or covering many areas of a small business. Check here for several speaker choices.

Inputs

The DYB2200 has eight inputs. Each input will play its own list of sounds. When an input is received the unit will play the next sound in the list for that input. It will continue to play to the end w/o interruption. If another input is received while the unit is playing it will be ignored. When the sound is done playing the DYB2200 will service the next input. The length of an input will not affect the servicing of the other inputs. The only time inputs are ignored is while the unit is playing.

Each input can respond to a Normally Open (NO) or Normally Closed (NC) contact input. This feature is programmed by the owner using our programming software and each input can be independently set to NO or NC. When the input is received the doorbell will play once and will not play again until the input has been reset. Each input is protected and will not be damaged if an input lasts for long periods of time. An input is considered reset when the opposite action of the input is received. A door push button is typically a NO contact. If the input is set for NO then when the button is pressed the contact is closed and the input is received and the DYB2200 will play. The doorbell will not play again until the the door button has been released and then pressed again. This allows the DYB2200 to be activated by magnetic locks, magnetic reed relay door switches and photo electric sensors.

Accessories

DYB2202
Add on amplifier.
10 Watt amplifier that produces excellent sound quality. The amplified output is capable of driving four 8 ohm speakers. This will work well in multi level homes, adding a speaker in the basement, placing a speaker outdoors for your company to enjoy or covering many areas of a small business. Check here for several speaker choices. This option allows the DYB2200 to be a stand alone unit. The amplifier is optional and must be ordered separately.

Exterior

The DYB2200 is housed in a plastic box that measures 1 1/2 inches tall by 6 inches wide by 4 1/2 inches deep. All wires attach to screw terminal headers that plug/unplug from the unit.


FAQ

Click on a question to expand the answer

-Does the software run on the Mac operating system?

The DYB2200 does not require any special programming software. Adding and deleting sound files is done using drag and drop from File Explore or Finder.

The Support page also has instructional videos that show how to change sound files.


-Will the DYB2200 work with the Video Door button?

Yes. We designed a device to act as an interface to the

It monitors the current flow through the Video Door Button and provides a solid state relay to actuate the DYB2200. You can find it on the Products page labeled Video Door Button Interface .


-How much is shipping?

Shipping is handled during checkout using the shopping cart. You will be charged the actual USPS shipping rate to your zip code. The DYB2200 weighs just under 2 lbs and is shipped in a 8x6x4" box.


Operation and Installation:

Editing the MicroSD card is fairly Straight forward. Insert the MicroSD card into the SD card carrier that comes with the YourBell. Place the SD carrier into the appropriate drive on your computer. Changes can then be made using drag & drop and simple edit commands.

Input polarity can be set to :
NO
NC

Sound files can be :
Added to a particular input in a particular season using drag & drop or copy
Deleted from a particular input in a particular season using drag & drop or delete

Each season/occasion contains the sound or series of sounds for each input. When the user programs one sound for an input then that sound will be played every time that button is pressed. Programming multiple sounds for an input allows for several sounds to be played. When the button is first pressed the first sound in the series will play. The second press will play the second sound in the series. This behavior will continue until the end of the list is reached. The next button press will cycle back to the first sound in the series.

The number of seasons/occasions can be from 1 to 26. With proper planning one can program the SD card once and never have to change it again. A season/occasion is selected using any input. See the Manual for more details.

DYB2200 comes with SD card, power supply and trigger cable.

Company Products Support BCS Ideas Corporation

About Us YourBell YourBell P.O. Box 213
Contact DAQ/DIO DAQ/DIO Kokomo, IN
Testimonials

46903 - 0213
Projects

Phone : 800.647.5470

FAX : 765.252.4161

This document maintained by BCS Ideas .
Material Copyright © 2006- BCS Ideas